Mopping a van is about using Machine Operated Polisher. There is a considerable difference between machine polishing and tidying a van. The correction of the art of paint and removing the marks and swirls is possible with mopping a van.
How much to mop a van?
To mop a van means it is related to Machine Operated Polishing. It may sometimes call for big paint blemishes correction such as apparent swirl marks, hollograming, and cob webbing. It buffs, polishes, and brings back the shine to the paint finish of a van that will show a high gloss, setting your van from others.
Mopping a van service is required when the paintworks of your van look a bit off-hand or weathered. Acquiring the MOP service results is possible, and here it is:
- The fine scratches reduce from appearing using a fine wet and dry paper, and the process is known as ‘flatting.’
- The next is machine polishing the panels using a compounding pad and cutting paste on the machine polishing equipment.
- It follows with a polish of finer grade using a machine polisher featuring a foam polishing head.
- An anti-swirl polish allows using the machine polisher foam head.
- Then using lint clothes and microfiber, hand polish allows retaining showroom shine.
- Finally, a stone chip touch is given mostly as free service.
What is Mop to a van?
Polishing a van helps eliminate surface scratches, oxidation, swirls, dirt, and other minor imperfections. The polishing of a van is best before applying wax. It is because it helps restore the paint of the van and its shine that it lost due to oxidation. The polishes of the van vary in their abrasiveness levels.
Buffing is to remove the clear coat of a van such that the scratched layer is removed completely. Buffing eliminates the scratched layer resulting in a brighter, smoother, and shinier finish. Buffing is performed using a high-speed electronic buffer or even by hand.
Misunderstood aspect of van polish
Newcomers are under the misapprehension that van waxing is enough to get the shine back, but it is not true. A wax function is to safeguard polished paintwork. It is a van MOP polish that helps sort issues with the paint.
- It brightens up the faded or dull paintwork.
- Removes scratches, eliminates oxidation, swirl marks, and other contaminants.
- It leaves clean, smooth, and shiny paint.
The process of Mop a van is related to paint correction. It is like your skin exfoliation. While applying wax is similar to your makeup that does not last long but looks good for a short period.
MOP a van implies polishing, and it is needed for your van if you are removing the layer. Simultaneously, it will help if you took care that you do not over-polish your van because it may thin out the paint eventually and cut through the color and the clear coat in extreme polishing.
How much to mop a van is that the machine-operated polishing removes the top layer to eliminate the paint defects. It is also referred to as the clear coat.
The MOP is to draw a clear coat as a thin layer so that the weaknesses are out, except for the deep scratches on your van. As you remove the swirls, water, and acid etching, marring, and holgramming, you can get prepared for smooth paintwork to clean and safeguard with wax.
How to polish your van?
Polishing is possible by machine or hand. It is safer by hand but is an uphill task to polish a van. Polishing by hand means you can at a time tackle only a 30x30cm section. It means you have to move each section by section.
It will show you the difference as you can see the sides that have not received your polish. There is a disadvantage of hand polish because people giving polishing by hand try to cut corners as they get bored or are tired with this task.
The efficient approach is to use a MOP. This machine polisher offers the best results. Using a machine polisher, you can get the correct polishing pad grade. It is easier, but exercising caution is a must so that your van does not experience too much machine polish. Bear in mind; it is to remove very little paint.
The polishing machine is in 2 types, a Rotary and DA Polisher. The rotary works faster, and it strikes through paint more quickly on edges, while the DA (Dual action) polisher is safer and preferably for home detailers.
It is not aggressive in action. Also, the polishing pads are a consideration depending on the various grades and sizes. Relying on the paint condition, choosing the polishing pad is important.
Car polish types
- Choosing a suitable polish is essential to ensure fine finishing polishes. The polish depends on the defects and swirls in the paintwork. Using less aggressive polish and pad combination removes the topcoat, and the job is complete.
- Polishing compounds are of use only if the van is swirled badly.
- Finishing polish is required after using cutting polish. It removes light marring, paint hazing, and holograms.
After polishing, the painted surface is perfected. Safeguard and protecting is done by using paint sealants and waxes. They protect from fallout, acid rain, tree sap, and bird droppings. A paint sealant is added to offer a high gloss finish, and it lasts more than a wax.
Benefits to mop a van
Van owners choosing to mop a van are people having concern and care for the van’s condition. The benefits are:
- It restores the value of your van. It increases the resale value if you plan to sell it. Besides, it keeps the van in good condition.
- It tackles the scrape, stain, scratch, and dent from your van. A professional work is a MOP, and it will give a complete transformation to the van’s appearance. They offer a systematic approach that the shine of the van is not lost.